Solution description:

Model DX68 CNC hose crimping device has outfitted with laptop numerical control technique, quickly crimp and very good top quality. This equipment functions substantial crimp precision, large drive, minimal sound and straightforward to work. It makes the mould foundation division to be a lot more even via the double inclined airplane eight-flap mould seat geared up with a large precision guiding unit. DX68 CNC hose crimping equipment is primarily employed for crimping processing for higher stress hydraulic hose assembly in the mechanical engineering. It can also be employed for crimping steel pipes, specifically big pipes and irregular condition pipes.This equipment characteristics tiny and portable visual appeal, big force, lower noise and straightforward to run. The buckling sum can be exact adjusted via a scale. It makes the mould foundation division to be a lot more even via the double inclined aircraft 8-flap mould seat geared up with a substantial accuracy guiding gadget.

Installation and Procedure
one. Include sufficiently 70 liters of CZPT Wall model 46# anti-abrasion hydraulic oil. If the place temperature is decrease than 10ºC, 10% transformer oil is require to add.
Hook up the electric powered source well as per the machine needs, to make the path of the motor rotation to be constant with the rotation path marking, and grounding safety shall be completed.
two. Regulating the scale
The scale is used for regulating the amount of the buckling. When it is controlled clockwise, the buckling quantity will reduce, when it is controlled anticlockwise, the buckling amount will increase. The scale is connected together with oil cylinder end go over by means of 3 socket head screws and 3 springs on the scale base. When using a hand to pull the scale (vertical to the oil cylinder conclude include direction), the scale can flexibly go away from the oil cylinder conclude include. When releasing the scale, the scale will be recovered relying on spring power. Just before the machine is turned on, inspect cautiously if the scale telescoping is versatile and if the guide connection is dependable.
three. The major scale is turned within line of the secondary scale, switch the device on for check operate, and observe if all steps are regular. If when the piston conducts reciprocating motion, there is a crawling phenomenon, the bleed screw on the oil cylinder top shall be unscrewed for exhausting air.
four. Strain regulation
The buckling pressure and opening mould strain will be controlled through two knobs at the back again of the oil cylinder (see figure), when it is controlled clockwise, the stress will improve, when it is regulated anticlockwise, the pressure will decrease (The force has currently been well controlled when ex-factory).
5. Procedure 
Based on the dimension of the rubber hose to be buckled, choose appropriate mould as for each the specialized parameter reference desk of the locking pipe and mount it on the mould base. Regulated nicely the scale situation as for each the info in the info in the desk, the pipe locking can be completed. Following pipe locking, use a vernier caliper to mease the outdoors diameter dimension of the pipe sleeve after buckling to see if it fulfills the reference table information of the parameter. If it does not fulfill the knowledge, the scale shall be precisely regulated right up until it satisfies the requirements. Simply because the manufactures of the pipe sleeve are different, so, specific dimension, materials, hardness and so on are certainly not the identical. These elements would consequence different influences on the pipe locking consequence, as a result, the information in the desk is only for reference, the thorough knowledge just take the pressure check as the foundation.

 Notices

1. When buckling, make the joint to identify the mould centre as much as attainable, the joint is not buckled on the hex nut.
2. Stop resource and other international issue from coming into the locking head.
3. Right after the operate is finished for each and every time, the eight-block mould base have to be manufactured to extend to the finest extent, this can make the spring to be at extension status. If not, the spring will be injury.
4. When doing work, the hand should not extend into the locking head.
5. The power provide have to be switched off when servicing is accomplished.

Maintenance

1. We will offer a promise to preserve the device in good restore inside of three a long time from the day when the machine is obtained. All fitting problems will be free of charge of charge repaired (or replaced if necessary) in the course of the assure time period. The harm resulted from poor use o incident hurt does not belong to free of charge fix assortment.
2. The hydraulic oil in the oil tank should be frequently checked, if oil quantity is identified to be inadequate, the oil shall be well timed supplemented. If the oil liquid is polluted, it shall be filtered or changed.
   The locking head shall preserve interior cleanliness. Steer clear of the overseas matters during processing to enter into the locking head oil cylinder through the mould to affect the standard use. Wipe out the international matters, which are introduced by the mould entire body in time when buckling the joint.
   Often fill suited grease into the mould physique for lubrication.

Guarantee
We will offer a ensure to hold the device in good restore within three a long time from the working day when the machine is acquired. All fitting difficulties will be totally free of charge repaired (or replaced if essential) in the course of the ensure interval. The injury resulted from incorrect use o accident harm does not belong to free of charge of cost repair assortment.

Troubleshooting

Trouble phenomena	Problems cause	Removing strategy
Equipment has not action	Oil tank has not been loaded with oil	Fill oil as for each need
	Motor rotation direction is not proper	Control two period strains
	CZPT difficulty	Overhaul electric powered circuits
Scale is destroyed	The scale is fixed on the oil cylinder finish encounter by the screw	Regulate the scale as for every the instruction to make scale to telescope freely
	Conductor at scale place is linked with scale	Anew hook up the scale conductor to make it to be insulated from scale foundation
	CZPT difficulties	Overhaul electrical circuits and electric aspects
	Scale conductor slicing	Anew join scale
	Program pressure is excessively lower	Modify buckling strain-regulating valve
No buckling	The valve core of solenoid reversal valve is seizured by overseas matters	Dismount solenoid reversal valve, use gasoline to clear the valve main.
	CZPT problems	Overhaul electric powered circuits
Mould is not opened	Opening mould stress is excessively minimal	Modify opening mould stress regulating valve
	CZPT difficulties	Overhaul electric powered circuits
Large sound	Set up is not secure	Perform horizontal stable installation
	CZPT oil is excessively soiled	CZPT or modify it
	CZPT is blocked	Use gasoline to thoroughly clean the filter
Mould base crawls	Fuel in the hydraulic oil has not bee fatigued entirely	Ideal unscrew the bleed screw, make the piston in the oil cylinder to shift back to very last place to exhaust gasoline, then screw down bleed screw.
	Lubrication is very poor	Smear grease on the doing work inclined face of mould foundation
Oil leakage	Joint is not tightened intently	Tighten the oil pipe joint
	Sealing washer is broken.	Change sealing washer.

Our services:

Pre-Sales Provider

* Inquiry and consulting assist.
* Sample screening support.
* Look at our Manufacturing unit & Workplace.
 

Soon after-Product sales Provider

* Guarantee for 3 a long time.
* Coaching how to instal and use the device.
* Provide free of charge fast-wear portion.
 
Payment Phrase:

CZPT Assurance

* Pay to our firm’s USD bank transfer BY T/T.
* 100% product top quality protection 100% on-time shipment protection 100% payment safety.

T/T

* 100% T/T in progress(normal designs in inventory).
* 50% T/T in progress, equilibrium paid out before delivery(for the CZPT versions).

Our manufacturing facility also have accept the payment by western union,paypal and cash gram.

FAQ:
one.Issue:Are you company or investing company?
Answer:We are maker since 1997.

two.Concern:Certificates ?
Reply:CE,ISO

three.Query:Supply time?
Answer:The equipment arein stock now,can be delivered as you need to have.

4.Question:What is theMOQ?
Answer:one set for you examination.

5.Concern:Can I get some discount ?
Of course, friend.The a lot more you get, the far more you save.

six.Question:What is the payment?
Reply:T/T in advance,as most of our crimping device model are in inventory.
L/C,western union,paypal and money gram also can be recognized.

7.Question:Can you make CZPT types or Symbol?
Of program, we are professional OEM manufacturer.

8.Question:Can I check out your manufacturing facility?
Yes,you are warmly welcome to visit our factory anytime. Before the going to, you should get in touch with us first of all and validate the checking out time, our car can pick up you to our factory.
 

Why select CZPT Factory?

one.High Quality CE UL ISO approved DX68 hose crimping device.

two.CZPT Cost-effective guide hose crimping device,Ideal Quality you at any time have.

three.Samway generate the hose crimping equipment up to 800mm diameter hose with 2500 ton urgent power.

four.Quick shipping, our manufacturing facility can dispatch the machine in 24 hrs as soon as obtain the payment and guarantee to ship nomally 7 operating days on board.

Discounts available with bulk purchase

Braided hose crimper DX68 Up to 2” 6SP R15 CZPT Hose Compact in Size Cost-effective CZPT Machine

220V 240V one phase  50/60hz, 380V/400v/415v/440v 3 section machine have stock.

A fantastic economical braided hose crimper will crimp up to two” 4SP/4SH hydraulic hose,the machine is equiped with most recent technological innovation,Motor from SIEMENS company control system from SIEMENS,CZPT hydraulic valves,NOK seal make the device druable.

Finn energy collection braided hose crimper are mainly for services and tiny manufacturing objective,cost-effective and compact in layout,perfect for most of your requirements in hose assembly.

Main clientele:RYCO,PIRTEK,PARKER United states,CATERPILAR etc.

OEM provider:Our manufacturing facility hydraulic hose crimping machine for sale up to 30″,crimping range up to 1000mm offered,5000 ton crimping power.

Guarantee:Our factory hose crimping machine provide 3 years guarantee from date of getting.