Elastomer Material Used Melt Pump, Rubber Pump

Elastomer Material Used Melt Pump, Rubber Pump

Rubber pump for plastic rubber extruder 

Large Pressure HDPE Extrusion equipment  hot soften equipment pump
Soften pumps appear in a assortment of sorts and sizes to match the needs of your extrusion, compounding or polymer production approach.

Benifits of the metering pump soften gear pump
one. Stabilizing the output pressure—the pressure on extruder can be reduced by 30%-50% after using melt pumps.
2. improving the product quality
three. increasing the extrusion output—reducing pressure on screw and chaning the building pressure from “screw to die” to “melt pump to die”, so the screw can extrude the products with high efficiency. Mean while the back-pressure on the extruder can be adjusted, reducing the melt residence in screw cylinder, stabilizing the plasticizing process and improving the product’s quality and quantity.
4. prolonging the working life—the pressure of extruder screw can be lowered after using the melt pumps, so screw wear can be reduced consumable

Concluded rubber pump 

Technica data
one.Rotate speed: ≤60rpm(Adjustable)
2.Temperature: 400°C (max.) 
three.Max.Outlet pressure: 350Bar
4.Max.Differential pressure: 275Bar 
5.Heating method: Stainless Steel Cartridge Heater
6.Fastening parts:  12.9 high-strength screws
7.Voltage: 380V(Others are optional)
8.Frequency: 50Hz(Others are optional)

Sort Quantity
(cc/r)
Max rotary speed
(r/min)
Outlet presssure
(MPa)
Inlet strain
(MPa)
Fee of flow      m3/h Temperature
Low viscosity material
500-1000Pa·s
Large viscosity content
one thousand~8000Pa·s
Ultra-higher viscosity
≥8000Pa·s
GM-RM-ten ten a hundred and twenty ≤35 Vacuum~5. ≤0.06 ≤0.04 ≤0.03 ≤350ºC
GM-RM-twenty twenty one hundred twenty ≤0.12 ≤0.09 ≤0.05
GM-RM-31.5 31.five 120 ≤0.19 ≤0.13 ≤0.08
GM-RM-fifty fifty a hundred and twenty ≤0.31 ≤0.21 ≤0.thirteen
GM-RM-seventy five 75 a hundred and twenty ≤0.46 ≤0.32 ≤0.19
GM-RM-one hundred 100 one hundred ≤0.51 ≤0.36 ≤0.21
GM-RM-one hundred sixty one hundred sixty 100 ≤0.eighty two ≤0.57 ≤0.34
GM-RM-two hundred two hundred a hundred ≤1. ≤0.seven ≤0.four
GM-RM-250 250 a hundred ≤1.three ≤0.9 ≤0.5
GM-RM-355 315 a hundred ≤1.6 ≤1.1 ≤0.seven
GM-RM-five hundred 500 100 ≤2.six ≤1.eight ≤1.one
GM-RM-750 750 80 ≤3.1 ≤2.1 ≤1.3
GM-RM-1250 one thousand 80 ≤4.1 ≤2.9 ≤1.seven
GM-RM-1600 1600 80 ≤6.5 ≤4.6 ≤2.7
GM-RM-2000 2500 eighty ≤10 ≤7 ≤4
GM-RM-3150 3150 eighty ≤13 ≤9 ≤5
GM-RM-4500 4500 sixty ≤14 ≤10 ≤6
GM-RM-6300 6300 60 ≤19 ≤13 ≤8
GM-RM-8000 8000 60 ≤24 ≤17 ≤10
GM-RM-12000 12000 50 ≤31 ≤21 ≤13
GM-RM-25000 25000 50 ≤64 ≤45 ≤27
Remark:the melt gear pump stream is linked with the operate velocity, content viscosity, stress,
So the model assortment remember to ask for us.

Software fields
GM-RM sequence rubber soften pump is successfully self-cleaning. The composition for shaft sleeves is straightforward, even though the fluid passageway is specially created. All of this make the pulsation charge grow to be considerably reduce under the higher differential pressure. This collection of melt pump applies to butadiene rubber, chloroprene rubber, EPDM, SBR, NBR, organic rubber, etc.

Elastomer Material Used Melt Pump, Rubber Pump