HP102 Hose CZPT Clamping Push Fitting Hose Crimping Devices Tool
Product Despriction
Hose crimping machine is mostly utilized for buckling processing for high strain rubber pipe assembly in the materiral engineering .It can also be used for buckling the two-way bends,specifically huge bends and irregular form bends.
Hose Crimping Machine Technical Parameters
| Model | HP102 |
| Crimping range | six-102mm(1/four”-4″) |
| Max Crimping Force | 1400T |
| Rated Pressure | 31.5Mpa |
| Weight | 520kg |
| Mold CZPTtity | 16 sets |
| Electricity | 4kw/5.5kw/seven.5kw |
| Voltage | 380v or CZPT |
| Scale accuracy | .01mm |
| Overall proportions | 900*790*1070mm |
Detailed Images
Installation and Operation
1. Add sufficiently 70 liters of CZPT Wall brand name 46# anti-abrasion hydraulic oil. If the room temperature is decrease than 10ºC, ten% transformer oil is want to incorporate.
Connect the electrical source nicely as for every the machine needs, to make the course of the motor rotation to be consistent with the rotation route marking, and grounding defense shall be accomplished.
2. Regulating the scale
The scale is employed for regulating the quantity of the buckling. When it is controlled clockwise, the buckling amount will lower, when it is regulated anticlockwise, the buckling amount will boost. The scale is linked together with oil cylinder conclude protect through a few socket head screws and a few springs on the scale base. When utilizing a hand to pull the scale (vertical to the oil cylinder stop protect direction), the scale can flexibly leave from the oil cylinder stop protect. When releasing the scale, the scale will be recovered relying on spring power. Just before the equipment is turned on, inspect carefully if the scale telescoping is adaptable and if the guide connection is reliable.
3. The principal scale is turned within line of the secondary scale, flip the device on for test operate, and notice if all actions are typical. If when the piston conducts reciprocating motion, there is a crawling phenomenon, the bleed screw on the oil cylinder top shall be unscrewed for exhausting air.
four. Pressure regulation
The buckling pressure and opening mould strain will be controlled by way of two knobs at the back again of the oil cylinder (see figure), when it is regulated clockwise, the strain will improve, when it is controlled anticlockwise, the pressure will lower (The strain has currently been well regulated when ex-manufacturing facility).
5. Procedure
Based mostly on the measurement of the rubber hose to be buckled, choose suitable mould as for every the technological parameter reference desk of the locking pipe and mount it on the mould base. Regulated properly the scale position as for every the information in the information in the desk, the pipe locking can be done. Following pipe locking, use a vernier caliper to mease the outside diameter dimension of the pipe sleeve following buckling to see if it satisfies the reference table information of the parameter. If it does not meet up with the information, the scale shall be precisely regulated until it meets the specifications. Due to the fact the manufactures of the pipe sleeve are diverse, so, distinct dimension, materials, hardness and so on are definitely not the exact same. These variables would outcome diverse influences on the pipe locking consequence, therefore, the data in the desk is only for reference, the in depth data consider the force take a look at as the basis.
Product Progress
Our services:
Pre-Revenue Provider
* Inquiry and consulting support.
* Sample tests assist.
* View our Factory & Workplace.
After-Revenue Support
* Guarantee for three several years.
* Training how to instal and use the machine.
* Supply cost-free rapid-use part.
Payment Phrase:
CZPT Assurance
* Spend to our company’s USD lender transfer BY T/T.
* 100% solution top quality protection 100% on-time cargo protection 100% payment protection.
T/T
* one hundred% T/T in advance(standard types in inventory).
* fifty% T/T in advance, stability compensated ahead of shipping and delivery(for the CZPT models).
Our manufacturing unit also have accept the payment by western union,paypal and income gram.
FAQ:
1.Issue:Are you producer or investing organization?
Solution:We are manufacturer because 1997.
2.Issue:Certificates ?
Reply:CE,ISO
3.Question:Supply time?
Reply:The equipment arein inventory now,can be sent as you require.
4.Concern:What is theMOQ?
Answer:1 set for you test.
five.Issue:Can I get some discount ?
Indeed, buddy.The far more you get, the much more you save.
6.Concern:What is the payment?
Reply:T/T in progress,as most of our crimping equipment design are in stock.
L/C,western union,paypal and cash gram also can be accepted.
seven.Concern:Can you make CZPT designs or Symbol?
Of training course, we are specialist OEM maker.
eight.Question:Can I visit your manufacturing unit?
Yes,you are warmly welcome to check out our manufacturing facility at any time. Ahead of the visiting, make sure you make contact with us to begin with and confirm the going to time, our auto can select up you to our manufacturing unit.
